Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 401

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Last Number Dial
If you dial a telephone number and, after the call is connected, dial additional
digits, such as an account number or password, Last Number Dial saves all digits,
including those dialed after the call is connected. In addition, if someone other
than the owner of a display telephone presses the Last Number Dial button, all
dialed digits are shown on the display, including confidential information such as
passwords or account codes.
Last Number Dial does not store numbers dialed through an Extension, Personal,
or System Directory, an inside Auto Dial button, a System Speed Dial code, or a
DSS button.
If the number is dialed using an outside Auto Dial button or Personal Speed Dial
code and includes a special character such as Pause or Stop, the special
character does not work when the number is redialed using Last Number Dial.
Mode Differences
Behind Switch
In Behind Switch mode, when a user manually dials an outside number that
includes a dial-out code (for example, an Automatic Route Selection or pool
dial-out code) required by the host system, the pauses required to wait for dial
tone from some host systems are not automatically stored for Last Number Dial.
As a result, a user may either hear a fast busy signal or reach a wrong number
when using Last Number Dial.
Key Mode
In Key mode, Last Number Dial cannot be used unless a Feature button is
programmed on an analog multiline telephone in Key mode. This Feature button
is used instead of the
Telephone Differences
Queued Call Consoles
Last Number Dial cannot be used on QCCs.
Other Multiline Telephones
To redial a number using Last Number Dial on a multiline telephone, select the
appropriate personal line (outside line) or SA button for the call. Then either press
the programmed Last Number Dial button or press the Feature button and dial
The number saved by the feature is dialed automatically. On MLX display
telephones, press the Feature button and select
display.
button to activate the feature code.
#
2 6
2 6
2 6
2 6
2 6
2 6
[
LastNumDial Last#
Issue 1
June 1997
Page 369
.
84
] from the