Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 413

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Messaging
If a fax message-waiting indication is deleted by one of the four message-waiting
receivers, the message is deleted from all analog multiline display telephones
programmed as a message-waiting receivers for the fax, but the message is not
deleted from MLX display telephones programmed as message-waiting receivers
for the fax.
Each calling group can have only one extension assigned as its message-waiting
receiver, but the same extension can be assigned as the message-waiting
receiver for more than one calling group.
Messages can be posted only by using a programmed button or, for MLX display
telephone users, by selecting the feature from the display.
A single-line telephone user cannot post a message.
When a user posts a nonexistent message,
indicating that the system manager has programmed a message for this message
number.
Only multiline display telephone users see posted messages. Users with
single-line telephones or multiline telephones without displays cannot receive
messages posted by other users.
Posting a message does not prevent the telephone from ringing.
Message Waiting does not work for off-premises telephones.
Telephone Differences
Direct-Line Consoles
The Send/Remove Message feature is an operator-only feature used by a DLC
operator to turn on the Message LED to indicate a message waiting. For
telephones without a display, Send/Remove Message is the only way the
Message LED can be turned on and off by operators.
A Send/Remove Message button is factory-assigned to an MLX-28D used as a
DLC. On a system with 29 or fewer lines, Alarm, Night Service, and Send/Remove
Message are assigned by default to analog DLCs on buttons 32 through 34. On a
system with more than 29 lines, Alarm is replaced with line 30, Night Service is
replaced with line 31, and Send/Remove Message is replaced with line 32. The
first 18 lines on an MLX DLC are always factory-set as personal lines.
Queued Call Consoles
A Queued Call Console (QCC) operator can use Leave Message only by
selecting the feature from the display. A Send/Remove Message button is
programmed as a fixed feature on a QCC.
is displayed,
CUSTOM MSG nn
2 8
2 8
2 8
Issue 1
June 1997
Page 381