Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 148

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Calling Restrictions
Primary Rate Interface
(PRI) and T1
Recall/Timed Flash
Speed Dial
System Access/
Intercom Buttons
Outward and toll restrictions do not work with T1 lines emulating tie trunks
when the lines are set to Tie-PBX or Tie Switched 56 Data. Use
Automatic Route Selection or pool dial-out codes instead.
If Recall is used on a personal line or Pool button—or, in Release 2.0 and
later systems, on an SA or ICOM button—to access an outside loop-start
line, the accessed line is kept, the user hears outside dial tone, and
calling restrictions are reapplied.
A user with an outward- or toll-restricted extension cannot dial a restricted
number by using Personal Speed Dial or System Speed Dial (excluding a
marked System Speed Dial code), unless the number is on an Allowed
List for that extension.
For Shared SA buttons, calling restrictions apply to the extension with the
SSA button, not to the principal user.
Issue 1
June 1997
Page 116