Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 364

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Integrated Administration
database, according to the rules listed in
programming.
Table 24. Database Reconciliation Rules
Extension appears in...
Application
System Database
Yes Yes
Yes No
No Yes
(regular extension)
No Yes
(special extension)
Yes Yes
(special extension)
Installation Overview
The qualified technician uses Integrated Administration during installation. The
steps below describe basic tasks, not detailed procedures (see the AUDIX Voice
Power or Fax Attendant System Manager's Guide for complete instructions about
programming the applications and System Programming for complete instructions
about programming the system). Note that the sequence of tasks differs,
depending on the installation:
If the communications system and IS III are both being installed for the first
time, the technician must do some initial programming on the system, as
described in Step 1.
If IS III is being installed on an existing system, the technician skips Step 1.
To install, follow these general procedures:
On installation of both the system and IS III , program the following basic
1.
system operating conditions. SPM in surrogate mode is typically used for
this step, but the programming console also can be used.
Action
None
Extension is added to database. Can be added as AUDIX
Voice Power or AUDIX Voice Power/Fax Attendant
subscriber through Extension Directory screen.
Extension is deleted from database and removed as an
AUDIX Voice Power or AUDIX Voice Power/Fax
Attendant subscriber.
Extension is retained as special-purpose extension in
database.
Extension is converted from special-purpose extension to
regular extension in database.
Mode of operation (Hybrid/PBX or Key only for Integrated
Administration)
System renumbering
System operator positions
Phantom extensions
Table 24. It does not change the system
2 4
Issue 1
June 1997
Page 332