Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 497

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Primary Rate Interface (PRI) and T1
and the number represented by the asterisks is used as the network selected.
Characteristics and valid entries for the Network Selection table are as follows:
There can be up to 4 entries (0 through 3).
The pattern can be up to eight digits.
An asterisk (
The pattern cannot begin with an asterisk but must contain at least one.
All asterisks must be at the end of the pattern and contiguous.
Table 33.
Entry Number
Pattern
The Special Services Selection Table (see
special services, such as operator service or international dialing (
multiple entries in the Special Services Selection Table match the dialed number,
the one with the most digits prevails. Characteristics and valid entries are as
follows:
There can be up to eight entries (0 through 7).
The pattern can be up to four digits (no wild cards).
The choices for Operator are Operator (OP), Presubscribed Common
Carrier Operator (OP/P), and None.
The choices for Type of Number are National (N) and International (I).
The number of digits to delete can be from 0 to 4.
Table 34. Sample Special Services Selection Table
Entry Number 0
Pattern 011
Operator None
Type of Number I
Digit Deletion 3
OP = Operator
OP/P = Presubscribed Common Carrier Operator
Call-by-Call Services Table. When a call is placed on a call-by-call B-channel
group, the dialed number and type of call must match one of the entries, the
specified number of digits is deleted, and the specified service is selected. Similar
) is a wild card.
*
Sample Network Selection Table
0
101****
1 2 3
010 01 00
OP OP OP/P
I I N
3 2 2
1 2
10***
Table 34), lists prefixes that represent
4 5
0 1
OP None
N N
1 1
Issue 1
June 1997
Page 465
3
or ). If
0 00
6 7
None None
N N
0 0