Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 593

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Station Message Detail Recording (SMDR)
When an incoming call was answered
When an outgoing call was originated (the system detects end of dialing)
In Release 4.2 and later systems, the reported time is as follows:
When an incoming call was detected in the system for Auto Login or Auto
Logout calling groups (if the Talk Time option is enabled)
When any other incoming call was answered (regardless of the value in the
Talk Time option)
When an outgoing call was originated (the system detected end of dialing)
CALLED NUMBER (Column 4)
The maximum number of digits printed in this field is 15. A question mark (?) in the
CALL TAG field (Column 5) indicates that the number overflowed because it was
more than 15 digits long.
For an incoming call in Basic format, this field displays
In Release 2.0 and later systems, for an incoming call in ISDN format, Column 4
displays the following values:
IN
Automatic Number Identification (ANI) on a PRI facility or
identification is available
In Release 3.0 and later systems, for an incoming call in ISDN format, Column 4
displays the following values:
IN
Automatic Number Identification (ANI) on a PRI facility, the Calling Party
Number on a loop-start facility using an 800 GS/LS-ID module, or
caller identification is available
In Release 4.0 and later systems, for an incoming call in ISDN format, Column 4
displays the following values:
IN
Automatic Number Identification (ANI) on a PRI, BRI, or T1 Switched 56
facility, the Calling Party Number on a loop-start facility using an 800
GS/LS-ID module, or
on a non-PRI facility
on a non-PRI facility
on a non-PRI facility
IN
if no caller identification is available
Issue 1
June 1997
Page 561
.
IN
if no caller
IN
IN
3 9
if no