MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Coverage
Secondary Cover
Ring Delay
Secondary
Coverage
Delay Interval
Retry Timing
Interval
Ring Timing Options, summarized in
including programmed Cover buttons on multiline telephones.
Table 5.
Ring Timing Options
Option
Immediate
Delay Ring
No Ring
Regardless of how these options are programmed, the green LED next to the
Cover button on the receiver's telephone flashes immediately when a call begins
ringing at the sender's telephone. The receiver's telephone rings audibly as
shown in
LED on both telephones continues to flash until the call is answered either by the
sender or by the receiver or the caller hangs up.
2 rings
1–6 rings
2 rings
Fixed
5 sec
Fixed
Factory
Setting
Range
—
—
2 rings
1–6 rings on
Cover
buttons
—
—
Table
6. Both telephones continue to ring as programmed. The green
Release 4.1 and later systems, programmable for
each extension. In addition to the fixed Secondary
Coverage Delay Interval (2 rings), this timer sets the
delay before a Secondary Cover button programmed
for Delay Ring begins to ring audibly. This setting
does not affect Primary or Group Coverage call
delivery.
Delay before sending Individual Coverage calls to a
Secondary Cover button programmed for Immediate
Ring, when sender also has Individual Coverage to a
Primary Cover button.
In Release 4.1 and later systems, the delay (in
addition to the Secondary Cover Ring Delay setting
for the sender) before a Secondary Cover button
programmed for Delay Ring begins to ring audibly.
Repetition interval for trying to send calls to group
coverage when no receivers are available; continues
until call is answered by sender or receiver (or caller
hangs up)
Table
5, are programmable on any buttons,
Description
—
Delay before sending calls to Group Coverage (in
addition to Coverage Delay Interval) when sender
also has Individual Coverage and receiver is available
On sender (covered) telephone, prevents calls from
going to coverage
Issue 1
June 1997
Page 144
Need help?
Do you have a question about the MERLIN LEGEND Release 5.0 and is the answer not in the manual?