Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 702

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
D General Feature Use and Telephone Programming
Telephone Programming
Step
1 Label the button to be
programmed.
Note: Skip this step if the feature
will not be programmed onto a
button.
2 Begin programming.
3 Identify the button to be
programmed.
To delete the features currently
programmed on the button:
To display features:
Action
Remove the clear label cover from the telephone by
pulling up on the tab that extends from the top of the
cover.
Write the feature name on the card next to the
button to be programmed.
Replace the cover.
Press Menu.
Select
Ext Program
Select from the display.
Start
Press the button you labeled.
Note: If the feature does not get programmed onto a
button, press any line button. This does not affect
the button in any way.
The display identifies the feature currently
programmed on the button. If no feature is
programmed, the display indicates that the button is
blank.
Select from the display. The button is now
Delete
blank.
Press the button you labeled again to continue
programming.
Note: If the currently programmed feature was not
deleted from the button, the new feature
programmed onto it will replace it.
Select
List Feature
The screen lists feature names in alphabetical order.
from the display.
from the display.
Continued on next page
Issue 1
June 1997
Page D-15