Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 53

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Index to Features by Activity
System Manager Features
Customizing the system
Set up account codes so that calls can be billed or
tracked to a specific client or project.
Set up which line is selected when a user lifts the
handset or presses the Speaker button.
Change extension numbers for extensions, adjuncts,
lines, telephones, ranges of extensions on a DSS,
Automatic Route Selection, calling groups, Idle Line
Access, Listed Directory Number, paging groups,
park zones, Pools, or Remote Access.
Change the overall system numbering plan; for
example, change to 2-, 3-, or a variable number of
digits for extension numbers.
Modify the line buttons (SA or ICOM) available on a
user's telephone: change, add, or delete.
Set up a single-line telephone so that it dials a specific
inside extension or outside number as soon as
someone lifts the handset.
Adjust the ringing at an extension, including one with
a single-line phone or MFM.
Set up special phones to be used for incoming and
outgoing calls during a commercial power failure.
Adjust the system dial tone to accommodate a voice
messaging system or modem.
Control what a caller hears while waiting for the
system (during transfer, while on hold, or during other
operations where the caller must wait).
Set up an adapter connected to an MLX extension to
support a fax machine, modem, or other device.
Change the language (English, French, or Spanish)
used in System Programming and Maintenance
(SPM) software.
Change the language (English, French, or Spanish)
used in Station Message Detail Recording (SMDR)
and programming reports.
Set up the Transfer feature for one-touch Transfer or
automatic Hold.
Control extensions with software running on an
associated worktop PC, on a local area network
(LAN) running Novell NetWare® 3.12, 4.1, or 4.11.
For Feature Name
N/A Account Code Entry/Forced
Account Code Entry
All telephones Automatic Line Selection and
Ringing/Idle Line Preference
(p. 56)
All System Renumbering
All System Renumbering
All except System Access/Intercom
single-line Buttons
For single-line HotLine
only (Release Speed Dial
5.0 and later)
For single-line/ Ringing Options
MFM Coverage
N/A Power-Failure Transfer
(p. 440)
N/A Inside Dial Tone
N/A Music On Hold
N/A Multi-Function Module
System Labeling
manager or
programmer
N/A Labeling
All Transfer
MLX and CTI Link
analog
multiline
Issue 1
June 1997
Page 21
(p. 25)
(p. 583)
(p. 583)
(p. 573)
(p. 320)
(p. 550)
(p. 533)
(p. 139)
(p. 324)
(p. 395)
(p. 386)
(p. 360)
(p. 360)
(p. 601)
(p. 173)