Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 586

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Speed Dial
Other Multiline Telephones
System Speed Dial
To dial a System Speed Dial number, press a System Speed Dial button
programmed with the code. Alternatively, lift the handset, press the Feature
button, and dial the System Speed Dial code associated with the number. Analog
multiline telephone users without programmed Feature buttons should select an
SA or ICOM button, lift the handset, and dial the System Speed Dial code.
Personal Speed Dial
Users of multiline telephones with more than 10 buttons should not use Personal
Speed Dial; doing so may delete features already programmed onto buttons. To
dial a Personal Speed Dial number on a multiline telephone, press the Feature
button and dial the Personal Speed Dial code (01–24) associated with the
number. While off hook or on an SA or ICOM button at an analog multiline
telephone without a programmed Feature button, dial
Dial Code.
Starting with Release 1.1, when programming Personal Speed Dial numbers,
MLX-10D and MLX-5D telephone users must select
dialing the telephone number.
Single-Line Telephones
To dial a Personal Speed Dial or System Speed Dial number using a single-line
telephone, lift the handset and, while listening to inside dial tone, dial
Speed Dial code.
In Release 5.0 and later systems, the first Personal Speed Dial number (code 01)
programmed for a single-line telephone is used by the HotLine feature. This inside
or outside number is dialed automatically when a user goes off-hook at a
single-line telephone programmed as a HotLine. The Personal Speed Dial
number may be programmed at the telephone prior to its being assigned as a
HotLine extension. Once the extension is programmed as a HotLine extension,
programming at the extension can only occur once, and any further programming
for the HotLine extension must be performed through centralized programming.
Feature Interactions
Account Code Entry A System Speed Dial number or a Personal Speed Dial number can be
programmed to replace a long account number, but it cannot be
programmed to contain both an account number and a telephone
number. Single-line telephones cannot use Personal Speed Dial or
System Speed Dial to dial account codes because the
Speed Dial is also used to terminate Account Code Entry.
3 9
and the Personal Speed
#
from the display after
Enter
3 9
3 9
Issue 1
June 1997
Page 554
3 9
3 9
and the
#
required to use
#