Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 566

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Ringing Options
At a Glance - Continued
Factory Settings
continued
Abbreviated Ring
Personalized Ringing
Pattern
Description
Ringing Options refers collectively to three options that determine how users'
telephones ring when they receive calls: Ring Timing options, Abbreviated Ring
options, and Personalized Ringing options. These options are programmed for
each extension through either extension programming or centralized telephone
programming, using the display or programming codes. In addition, the system
uses distinctive ringing patterns to identify various call types to the telephone
user.
Ring Timing Options
Ring Timing options control how soon a telephone rings, or whether it rings at all
when a call arrives. Line buttons on each extension can be programmed so that
calls ring as follows:
Immediate Ring (factory setting). Rings as soon as a call arrives.
Delay Ring. Provides a delay before the telephone rings. The length of the
delay depends on the type of button and the coverage arrangement:
— On outside line, SA (including Shared SA), and ICOM buttons
— On Cover buttons programmed for Delay Ring in Release 4.0 and prior
— In Release 4.0 and prior systems, when a sender has both Individual
Enabled
1 (pattern numbers 1–8)
programmed for Delay Ring, the delay is fixed at two rings and cannot
be changed.
systems, the systemwide Delay Ring Interval, set through system
programming, provides a delay of 1 to 6 rings with a factory setting of 2.
In Release 4.1 and later systems, system managers customize
coverage delays on an extension-by-extension basis. The Coverage
Delay Interval and Delay Ring Interval systemwide settings are replaced
by these extension timers: Primary Cover Ring Delay and Secondary
Cover Ring Delay (range 1–6 rings, factory setting 2 rings).
and Group Coverage and an Individual Coverage receiver is available,
the programmed systemwide Delay Ring Interval of 1 to 6 rings provides
a delay, in addition to the systemwide Coverage Delay Interval, before
calls go to Group Coverage.
3 8
3 8
Issue 1
June 1997
Page 534