System Renumbering - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

Communications system
Hide thumbs Also See for MERLIN LEGEND Release 5.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

System Renumbering

Saved Number Dial
SMDR
Transfer
System Renumbering
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
Maximum
Incoming calls on a Shared SA button ring with the personalized ringing
pattern programmed for the telephone with the button (not the principal
extension).
The principal extension of Shared SA buttons can use Send Ring. This
feature overrides Delay Ring programmed for any telephones with
Shared SA buttons for the principal extension. When a call arrives for the
principal extension while it is busy, the Shared SA buttons ring
immediately.
If Saved Number Dial is used on a Shared SA button, the number is
stored on the telephone that used the feature, not on the principal
extension.
When a call is made from an SSA button, the SMDR report records the
extension from which the call is made, not the principal extension.
A transferred call returns only to the telephone that originated the
transfer, whether an SA or a Shared SA button.
If a transfer originator has an SSA button for the person receiving the
transfer, the LED next to the SSA button flashes to indicate a ringing call.
However, if the transfer originator answers the call, it is disconnected.
Telephone users, operators, data users
Automatic Route Selection, Dial Plan, Extension Directory,
Extension Information, Group Paging, Operator Information,
Remote Access (DISA) Information
All
All
Change the 2-digit numbering plan to 3-digit or Set Up Space:
SysRenumber
2-Digit/3-Digit/Set-up Space
Renumber individual extensions or groups of extensions,
calling group extensions, Group Paging extension, pool
dial-out codes, operator park zones, Listed Directory Number
extension, remote access code, ARS access code; or assign
the range of extensions on a DSS:
SysRenumber
SysRenumber
Numbering Range: 0–9950
3 9
3 9
Default Numbering
Single
Block
Issue 1
June 1997
Page 583

Advertisement

Table of Contents
loading

Table of Contents