Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 305

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Forward and Follow Me
button, you hear a confirmation tone (double break in dial tone), and then dial tone
is removed. If a programmed Forward button is used, the green LED next to the
button turns on.
To forward calls to an outside telephone number, either press a programmed
Forward button or press the Feature button and dial
line/trunk or pool on which to route forwarded calls by dialing either the Automatic
Route Selection (ARS) or pool dial-out code (Hybrid/PBX mode only), the Idle
Line Access code (usually
line/trunk number (usually 801–880). Then dial the destination telephone number
followed by a pound sign (
off hook on an SA or ICOM button, you hear a confirmation tone, and then dial
tone is removed. If a programmed Forward button is used, the green LED next to
the button turns on.
To turn on Follow Me, press the Feature button, dial
telephone's extension. If you are off hook on an SA or ICOM button, you hear a
confirmation tone and dial tone is removed. An MLX display telephone user can
also use Follow Me by pressing the Feature button, selecting the feature from the
display, and dialing the forwarding telephone's extension.
To turn off Forward, Remote Call Forward, and Follow Me at the originating
multiline telephone, press the programmed Forward button, or press the Feature
button, dial
that extension). If you are off hook on an SA or ICOM button, you hear a
confirmation tone, and then dial tone is removed. If a programmed Forward
button is used, the green LED next to the button turns off.
At a destination (receiving) multiline telephone, to cancel Forward and Follow Me
from other extensions, press the Feature button, dial
following:
To cancel forwarding from one extension, dial that extension.
To cancel forwarding from all extensions, dial
If you are off hook on an SA or ICOM button, you hear confirmation tone, and then
dial tone is removed.
Single-Line Telephones
At a single-line telephone, you must connect to an SA or ICOM line to turn on
forwarding or Follow Me to an extension or outside line.
To forward to an extension, lift the handset and then dial
destination extension number. You hear a confirmation tone, which is a double
break in dial tone, and dial tone is removed.
To forward calls to an outside telephone number, lift the handset and dial
Then select the outside line/trunk or pool on which to route forwarded calls. Dial
the ARS or pool dial-out code (Hybrid/PBX mode only), the Idle Line Access code
; Key and Behind Switch modes only), or the
9
) to signal the end of the dialing sequence. If you are
#
, and dial your own extension number (in effect, "forwarding" calls to
33
. Then select the outside
33
, and dial the forwarding
34
, and do one of the
*34
.
*
2 2
followed by the
#33
Issue 1
June 1997
Page 273
.
#33