Merlin Legend Reporter - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
I Applications

MERLIN LEGEND Reporter

System Programming
Set basic system operating conditions:
Remove CMS lines from all telephones (Key mode only) or from pools
(Hybrid/PBX mode only).
Set up three DLC system operator positions, two for CMS PC positions and
one for the CMS supervisor position (if a CMS supervisor telephone is
required).
Set up a CMS fallback plan:
Assign the agent telephones to a calling group and assign group coverage
to the calling group.
Designate the CMS supervisor console as a group coverage sender.
Set up optional equipment and features, including headsets and paging groups.
Set the Ringing options for lines assigned to CMS ports to No Ring.
Platform Requirements
To connect CMS to the system, you need the following equipment:
A Lucent Technologies-approved DOS PC, with:
— CMS interface card with two 14-ft. (430-cm), 4-pair modular extension
— CMS software
Digital Announcer Unit with one 14-ft. (430-cm) DIN connector cord
Parallel printer with cable to connect to the PC parallel port
Supervisor console, any DLC position
Agent telephones, any MLX or analog multiline telephones
One analog multiline module (008 or 408) to connect the two PC ports to
the extension jacks assigned as DLC ports
MERLIN LEGEND Reporter
IMPORTANT:
This section is intended solely as an overview of the application. For
comprehensive information about the use of the application, see the
documentation for the product.
Available for Hybrid/PBX mode in Release 4.2 and later systems, MERLIN
LEGEND Reporter helps system managers and calling group supervisors assess
cords
9
9
9
Issue 1
June 1997
Page I-31