Auto Answer All - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Auto Answer All

Auto Answer All
At a Glance
Users Affected
Reports Affected
Modes
Telephones
Programming Code
MLX Display Label
Hardware
Description
Auto Answer All is used on analog multiline telephones only, including analog
Direct-Line Consoles (DLCs) with a modem, answering machine, or other
answering device connected through a General Purpose Adapter (GPA) to
answer both inside and outside calls when the user is not available.
To activate Auto Answer All, slide the switch on the GPA to Auto and press the
Auto Answer All button. The green LED next to the button turns on, and incoming
calls are answered automatically.
To deactivate the feature, either slide the switch on the GPA to Basic or press the
Auto Answer All button. If the button is pressed to deactivate the feature, the
green LED next to the button turns off. In either case, the telephone returns to
normal operation.
Auto Answer All can also be used with a headset adapter to allow an analog
multiline telephone user or analog DLC operator with a headset to be connected
automatically to ringing calls. A tone heard through the headset signals an
incoming call.
A programmed button activates and deactivates Auto Answer All. Select the lines
to be answered by the device by programming Immediate Ring or Delay Ring as
the ringing option. Lines that are not to be answered should be programmed as
No Ring.
Telephone Differences
Queued Call Consoles
Auto Answer All cannot be used on a QCC.
Telephone users, DLC operators, data users
Extension Information
All
Analog multiline
*754
(in centralized telephone programming)
AutoAns All
General Purpose Adapter (GPA) needed to connect
answering device to analog multiline telephone; 502C
headset adapter needed for headset options.
0
0
0
0
0
Issue 1
June 1997
Page 45