Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 439

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Night Service
Primary Rate Interface
(PRI) and T1
Remote Access
Ringing Options
System Access/
Intercom Buttons
Notify
See ''Signal/Notify'' on page
A PRI B-channel can be assigned to a Night Service group if the Routing
by Line Appearance option is assigned to the B-channel group. If routing
by dial plan is assigned to the B-channel group, the B-channels in that
group cannot be assigned to Night Service groups.
In Release 4.0 and prior systems, when shared remote access is
assigned to a line/trunk, incoming calls on that line/trunk receive remote
access treatment only when Night Service is activated on all operator
positions that receive calls on the line/trunk. When a call is received on a
line/trunk assigned for shared remote access and Night Service is not
activated, the call rings at the assigned telephone, operator console, or
calling group.
In Release 4.1 and later systems, when shared remote access is
assigned to an outside line that belongs to one or more Night Service
groups, calls received on that outside line receive remote access
treatment when Night Service is activated on any operator position.
When Night Service is turned on, calls received at a Night Service group
member's telephone ring immediately, even if the line buttons are
programmed for Delay Ring or No Ring. When Night Service is turned off,
extensions return to their programmed Ring Timing options.
Night Service calls override any Ring Timing options (Delay Ring or No
Ring) programmed for SA buttons and ring immediately. Shared SA
buttons flash and do not ring.
547.
2 9
Issue 1
June 1997
Page 407