Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 304

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Forward and Follow Me
The Forwarding Delay setting cannot be copied from one extension to another
because it is not associated with a button.
In Release 4.1 and later systems, an SA or ICOM call placed to a forwarding
extension with no available SA or ICOM buttons is forwarded immediately. As a
result, the call may arrive before other forwarded calls that are still ringing
according to a programmed Forward Delay setting.
Forward on Busy (Release 4.1 and later systems only) is automatic and cannot be
changed through programming. It is not activated when the forwarding telephone
is busied-out for maintenance or system programming, or when the forwarding
telephone is unplugged or in extension or system programming mode.
In Release 3.1 and later releases, Remote Call Forwarding checks the
dial-access-to-pools restriction and denies the call if pool access is restricted.
Telephone Differences
Direct-Line Consoles
A DLC operator can forward calls to extensions and, if allowed through system
programming, to outside telephone numbers. Because outside lines are assigned
as personal line buttons on the console, the ability to forward calls received on
each outside line (excluding loop-start lines with unreliable disconnect) to an
outside number must also be assigned through system programming and can be
assigned to only one telephone for each individual line/trunk.
Queued Call Consoles
Calls cannot be forwarded from a QCC to another extension or an outside number
(a QCC operator uses Position Busy instead). However, users can forward calls to
an individual QCC.
To turn on Follow Me for another extension at a QCC, press the Feature button
and select the Follow Me feature from the display. At the prompt, dial the
extension of the forwarding telephone.
To cancel Forward and Follow Me from other extensions: at the destination QCC,
press the Feature button, select
display. Then do one of the following:
To cancel forwarding from one extension, dial that extension number.
To cancel forwarding from all extensions, dial
Other Multiline Telephones
To forward calls to an extension, either press a programmed Forward button and
dial the destination extension number, or press the Feature button, dial
dial the destination extension number. If you are off hook on an SA or ICOM
2 2
2 2
2 2
(Cancel Follow Me) from the
CanclFollow
*
2 2
June 1997
Page 272
.
, and
33
Issue 1