Music On Hold - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Music On Hold

Music On Hold
At a Glance
Reports Affected
Modes
Telephones
System Programming
Maximums
Description
Music On Hold can provide music or recorded information to an outside caller
when the following features are used:
Conference (while on hold)
Group Calling (while waiting in the calling group queue for a busy extension
after listening to the delay announcement)
Hold
NOTE:
The music source or recorded announcement device must be connected to
a ground-start or loop-start line/trunk jack programmed for Music On Hold.
If Music On Hold is used without connecting a music source properly, an
outside caller hears nothing.
In addition, Music On Hold can be programmed for the Transfer Audible feature
as an alternative to ringback in the following feature interactions:
Camp-On
Hold, Transfer, and Conference for single-line telephones
Park
Transfer
If transfer audible is programmed, what callers hear is described in
System Information (
All
All
Designate the Music On Hold extension jack:
AuxEquip MusicOnHold
1 Music On Hold extension for each system
2 8
2 8
)
SysSet-up
2 8
Issue 1
June 1997
Page 395
Table 29.