Conference - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Conference

Group Calling
Recall/Timed Flash
Speed Dial
Transfer
Conference
At a Glance
Users Affected
Reports Affected
Modes
Telephones
Programming Codes
Conference
Drop
MLX Display Label
System Programming
Maximums
Multiline telephones
Single-line telephones
Description
Conference allows conference calls that include people on inside lines, outside
lines, or both.
Calls to calling groups in a system set up in Behind Switch mode follow
the communications system ring pattern, not the central office ring
pattern.
In Behind Switch mode, a Recall button should be programmed to send
switchhook flash to activate Centrex features. The system supports the
use of a Recall button only on loop-start lines.
During periods of high traffic, users may experience a delay in obtaining
dial tone from the Centrex service. This could cause misdialing when
using System Speed Dial or Personal Speed Dial. Pause characters can
be programmed as part of the Speed Dial number after entering the
access code.
In Behind Switch mode, the fixed-function Transfer button applies to
Centrex transfers and is not recognized by the communications system. A
button can be programmed for communications system Transfer.
Telephone users, operators
System Information (
All
MLX telephones and analog multiline telephones except
MLC-5 cordless telephone.
*772
*773
Conference [Conf]
Drop [Drop]
Assign host system conference dial code:
Options
Assign host system drop dial code:
Options
5 participants (originator + 2 inside, 2 outside)
3 participants (originator + 2)
3
3
)
SysSetup
More BehndSwitch
More
BehndSwitch
3
Issue 1
June 1997
Page 129
Conference
Drop