Callback; Linestrunks Remoteaccss - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Callback

Callback
At a Glance
Users Affected
Reports Affected
Modes
Telephones
Programming Codes
Auto on
Auto off
Selective
Feature Codes
Selective
Cancel request
MLX Display Label
System Programming
Maximums
Dialed digits for each
queued call
Queued calls in the system
Factory Settings
Automatic Callback rings
Automatic Callback
Description
Callback provides an easy way to complete calls to busy extensions and, in
Hybrid/PBX mode, to outside numbers when all lines/trunks are busy in the pool
through which calls are made. (See
about busy lines in Key and Behind Switch modes.)
Two types of Callback can be programmed for an extension:
Automatic. Callback is activated automatically whenever the caller
reaches a busy extension or when all lines/trunks in a pool are busy. This
feature is set to On or Off for each extension.
Telephone users, DLC operators, data users
Extension Information, Remote Access (DISA) Information,
System Information (
All
All except QCC
*12
**12
*55
55
(single-line telephones, data equipment)
*55
Cback Auto,On [CbckA,On]
Cback Auto,Off [CbckA,Off]
Cback Sel [CbckS]
Specify the number of rings to the callback originator before
the system cancels a callback request:
Options Callback
Enable or disable the use of Callback for busy pools for
remote access users:
LinesTrunks RemoteAccss
40
64
3 before system cancels callback request (range 1–6)
Off
''Line Request'' on page 372
3
3
)
SysSet-up
AutoQueuing
3
Issue 1
June 1997
Page 97
for information