Analog Multiline Telephones - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
H Programming Special Characters

Analog Multiline Telephones

Analog Multiline Telephones
Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H–2. Special Characters for Analog Multiline Telephones
Press...
†
Drop
Hold
Conference
##
#
1.
2.
1
See ... Means...
Stop. Inserts a Stop within a sequence of automatically
s
dialed numbers. For example, an outside Auto Dial
button may be programmed with a password, then a
Stop, then a telephone number. To use Auto Dial with a
Stop in the sequence, the user presses the button to
dial the password, listens for the dialing and connection,
and presses the button again to dial the number.
Pause. Inserts a 1.5-second pause in the dialing
p
sequence. Multiple consecutive pauses are allowed.
2
Flash. Sends a switchhook flash. Must be the first entry
f
in the dialing sequence.
End of Dialing for Auto Dial buttons. Used at the end
#
of a dialing sequence to indicate that the user has
finished dialing or to separate one group of dialed digits
from another.
End of Dialing. Used at the end of a dialing sequence
#
to indicate that the user has finished dialing or to
separate one group of dialed digits from another.
Display telephones only
Not available on MLC-5, MDC 9000, and MDW 9000 cordless and
cordless/wireless telephones
8
Issue 1
June 1997
Page H-2