Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 391

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Integrated Administration
Group Calling
Labeling
Night Service
Ringing Options
System
Renumbering
Transfer
AUDIX Voice Power services and the Fax Response service are set up as
members of dedicated calling groups. Integrated Administration sets up
the necessary calling groups with the applicable options for correct
operation of these services.
See ''Integrated Administration in Release 4.1 and Later Systems'' on
page 329 for information about using Integrated Administration with
Group Calling settings in Release 4.1 and later systems.
Names entered on the Extension Directory screen are sent to the switch
and appear on system programming labeling screens on the
programming console or System Programming and Maintenance (SPM).
Names entered on the console or SPM appear on the Extension Directory
screen after Extension Directory setup is completed. Labels are added to
lines and calling groups, as appropriate, when services are selected
through Integrated Administration.
The Automated Attendant service can be used for Night Service
operation. The necessary system programming options can be set
through Integrated Administration.
The total of the values programmed for Delay Ring plus Coverage Delay
Interval should be less than either the transfer return time or the VMS
transfer return interval. These values are shown on the Application Switch
Defaults screen.
System renumbering can be done only through system programming on
the programming console or SPM. Integrated Administration never sends
system numbering information to the system.
Both the transfer return time and the VMS transfer return interval should
be greater than the total of the values programmed for Delay Ring plus
the Coverage Delay Interval. These values are shown on the Application
Switch Defaults screen.
See ''Integrated Administration in Release 4.1 and Later Systems'' on
page 329 for information setting the transfer return time and the VMS
transfer return interval in Release 4.1 and later systems.
Issue 1
June 1997
Page 359