Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 166

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Conference
participant, dial another number and press and release either the Recall or Flash
button or the switchhook again. All participants are connected on the conference
call.
You can converse privately with each participant before pressing and releasing
either the Recall or Flash button or the switchhook to join other participants. This
is called Conference with consultation .
Calls to busy numbers cannot be added to a conference. If you reach a busy
number, you can press and release either the Recall or Flash button or the
switchhook to drop the outside line.
A single-line telephone user can drop the most recently added participant from the
conference by pressing and releasing either the Recall or Flash button or the
switchhook.
If a single-line telephone with a timed or positive disconnect (for example, Lucent
Technologies model 2500YMGK, 2500MMGK, or 8110M) is used, pressing the
switchhook disconnects the call. With this type of telephone, the Recall or Flash
button must be used instead of the switchhook to add a conference participant or
drop the most recently added conference participant. The 8100M telephone must
have positive disconnect programmed on the telephone, as described in its user
guide.
Feature Interactions
Account Code Entry
Allowed/
Disallowed Lists
Authorization Code
Auto Dial
A separate account code must be entered for each outside call added to
the conference.
A user with an outward-restricted extension cannot add an outside
participant to a conference unless the participant's number is on an
Allowed List assigned to the extension. A user with a toll-restricted
extension cannot dial a toll number to add a participant unless the
participant's number is on an Allowed List assigned to the extension.
You cannot add an outside number to a conference if the number is on a
Disallowed List assigned to your extension.
Enter an authorization code before each outside call for a conference is
made.
You may enter a different authorization code for different outside calls if
you wish. This may be useful if different restriction privileges are required
for different outside calls for the conference.
When programming an Auto Dial button, press the Conf button to enter
the Flash special character in a telephone number programmed on an
Auto Dial button. Press the Drop button to enter the Stop special
character in a telephone number programmed on an Auto Dial button.
3
Issue 1
June 1997
Page 134