Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 763

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
I Applications
PassageWay Direct Connection Solution
PassageWay Direct Connection Solution includes these applications:
Call. A cardfile application that enables you to maintain information such
as names, addresses, and telephone numbers. You specify the information
that you want to store. With Call, you can place a call directly from the PC
and keep a log of all outgoing calls.
Set. A telephone programming application that enables you to program
telephone features for your telephone from your PC. You can also create
and save multiple-button programming files for your telephone and can
exchange these files with other Set users.
Log Viewer. An application that enables you to view the entries stored in
the PassageWay Direct Connection Solution call log. The call log stores a
record of every call you make using Call.
Connect. Management software that provides both the basis for other
PassageWay Direct Connection Solution software applications and the
diagnostic features to troubleshoot these applications. Auto dialing
capabilities using the Hayes-compatible command set are also provided.
Buzz. You can manage incoming calls (answer, hold, or drop) and view the
calling party number (Caller ID) for each incoming call at your telephone.
Considerations and Constraints
If there are problems connecting PassageWay Direct Connection Solution to a
communications port, see the PassageWay Direct Connection Solution manual
for information on PC serial ports.
Feature Interactions
Idle Line Preference Your MLX telephone should have Idle Line Preference activated. With
Idle Line Preference activated, the system automatically selects a line for
outgoing calls when you go off hook.
The system manager should set Automatic Line Selection on your
telephone so that your Idle Line Preference is on an ICOM button (in Key
or Behind Switch mode) or an SA button (in Hybrid/PBX mode). Ensuring
that Automatic Line Selection is set to an ICOM or an SA button means
you can make both inside and outside calls via Lucent Technologies Call.
(You make outside calls on an ICOM or SA button by dialing
9
9
Issue 1
June 1997
Page I-6
9 .)