Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 447

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Paging
Personal Lines
Pickup
Pools
Primary Rate Interface
(PRI) and T1
Remote Access
SMDR
System Access/
Intercom Buttons
System
Renumbering
Transfer
Voice Announce
to Busy
A line/trunk used for loudspeaker paging equipment cannot be assigned
as a personal line.
When the line number used for loudspeaker paging is not assigned to a
button on a multiline telephone, you can access the loudspeaker paging
system with Individual Pickup: dial the paging jack's line number
(801-880) or program a Pickup button specifically for the paging line
number.
In Hybrid/PBX mode, line/trunk jacks used for loudspeaker paging cannot
be assigned to pools.
If the extension for an incoming PRI call matches a group paging
extension, the call is treated as an unassigned Direct Inward Dial (DID)
call.
Data lines cannot be used for paging.
Loudspeaker Paging cannot be accessed from outside the system
through either DID lines or remote access.
Paging calls are not printed on the SMDR report.
Announcements using Speakerphone Paging can be made from a
Shared SA button. However, users cannot join a page on a Shared SA
button.
Extensions for paging groups can be renumbered. The factory-set
extensions are 793 through 799; Page All is 799.
Calls cannot be transferred either to paging groups or the loudspeaker
paging extension.
Users who program their extensions to turn off Voice Announce to Busy
(Voice Announce on MLX telephones) do not receive individual or group
speakerphone pages.
Issue 1
June 1997
Page 415