Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 183

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Coverage
The receiver with an MLX display telephone is using the Alarm Clock or
Directory feature.
The receiver's telephone is forced idle for system programming or
centralized telephone programming.
The receiver's telephone is not responding (for example, not connected).
If a call is sent to Group Coverage and no receiver is available, the system
continues trying to send the call every five seconds until a Group Coverage
receiver becomes available. This repeated attempt to send the call is call retry
timing . The 5-second retry timing interval cannot be changed.
Table 8 shows when a call goes to Group Coverage receivers in Release 4.0 and
prior systems.
Release 4.1 and later systems. In both tables, the rules for sending calls to Group
Coverage apply after the calls first go to any available Individual Coverage
receivers (as described in
See Figures
patterns in Release 4.0 and prior systems and in Release 4.1 and later systems.
Figures 6
used or when all Individual Coverage receivers are unavailable. Figures
show examples of what happens when both Individual Coverage (Primary and
Secondary) and Group Coverage are programmed for an individual sender.
Table 9 shows when a call goes to Group Coverage receivers in
Table 6 on page
6 through 9, pages
and 7 show examples of what happens when only Group Coverage is
145).
154 through 157, for examples of LED and ringing
Issue 1
June 1997
Page 151
8 and 9