Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 477

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Primary Rate Interface (PRI) and T1
Call-by-Call Services
Table
Patterns
Call type
Service
Digits to delete
Timer and counter
thresholds for each 100D
module
T200 Timer
T203 Timer
N200 Counter
N201 Counter
K Counter
T303 Timer
T305 Timer
T308 Timer
T309 Timer
At a Glance - Continued
Factory Settings
PRI
Timer and counter
thresholds for each 100D
module
continued
T310 Timer
T313 Timer
T316 Timer
Link layer address or TEI
assigned
PRI Dial-Plan Routing
Table
Service value
Digits for each pattern
Digits in Called Party
Number
Digits to add
T1 Dial-Plan Routing
Table
Expected Digits
Digits to delete
Digits to add
Description
The MERLIN LEGEND Communications System supports two types of service for
DS1 (Digital Signal Level 1) facilities: T1 and PRI.
T1 service transmits and receives voice and analog data as well as digital data
services in Release 4.0 and later releases.
Blank
Both (Voice and Data)
Blank
0
1 second (range 1,000–3,000 ms)
30 seconds (range 1–60)
3 transmissions (range 1–5)
260 octets (range 16–260)
7 frames (range 1–15)
4 seconds (range 4–12)
4 seconds (range 4–30)
4 seconds (range 4–12)
90 seconds (range 30–120)
60 seconds (range 2–120)
4 seconds (range 4–60)
120 seconds (range 30–120)
0 (range 0–63)
Empty
Blank
0
Blank
Blank
0
Blank
3 0
Issue 1
June 1997
Page 445