Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference page 635

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features
Transfer
Timing begins when the transfer is completed. If the transfer fails for any reason
(such as an invalid destination), the transfer return time is automatically set to 2
rings to allow a faster return unless the programmed value is 0 (no transfer
return).
Except on a QCC, returning transferred calls ring at the originating extension with
a distinctive ring (a 3-ring pattern). Display telephone users also see the call type
on the display.
Return
NOTES:
1. A call transferred to an extension programmed as a fax extension does
2. A call transferred to a calling group does not return, and the ringing and
One-Touch Transfer
The system is programmed either for one-touch Transfer (the factory setting in
Hybrid/PBX and Key modes) or for one-touch Hold (described below). With
one-touch Transfer, a telephone user or operator can transfer a call to another
extension by pressing a programmed Auto Dial or Direct Station Selector (DSS)
button for the extension. With this single press of a button, the active call is put on
hold and the system automatically selects an SA or ICOM button and dials the
transfer destination.
With one-touch Transfer, the system is also programmed to complete transfers in
one of the following ways:
Automatic Completion (factory setting). A transfer is completed
automatically as soon as the Auto Dial or DSS button is pressed. The call is
removed from the telephone that initiated the transfer and begins ringing at
the destination extension.
One-touch Transfer with automatic completion does not allow a transfer
with consultation. This type of transfer is always a ringing call, and voice
announcements cannot be made. However, telephone users and operators
can still initiate a transfer with consultation by pressing the Transfer
button, then either dialing the destination extension or pressing an Auto
Dial or DSS button.
When one-touch Transfer with automatic completion is programmed, the
transfer of a call either to a busy extension or to an extension with Do Not
Disturb active is completed automatically, although the call cannot be
connected. The call does not return to the transfer originator until the
transfer return time expires.
not return to the originator, but continues to ring at the fax extension.
This eliminates the possibility of a high-pitched fax tone being heard by
the person who answers the returning call.
flashing LED is cleared from the SA or ICOM button on the originator's
telephone as soon as the transfer is completed. The call does not stay
on hold.
Issue 1
June 1997
Page 603
4 1