Primary Rate Interface (Pri) And T1 - Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference

MERLIN LEGEND Communications System Release 5.0
Feature Reference 555-650-110
Features

Primary Rate Interface (PRI) and T1

Primary Rate Interface (PRI) and T1
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
Systemwide
100D Module
PRI
Telephone users, operators, data users
DS1 Information, PRI Information, SMDR
Key, Hybrid/PBX
All (display support on MLX telephones only)
Specify modules that provide primary, secondary, and tertiary
clock synchronization and source of clock synchronization;
also activate/deactivate clock:
More
LinesTrunks
Specify type of facility connected to 100D module:
LinesTrunks LS/GS/DS1
Specify framing format for 100D module:
LinesTrunks LS/GS/DS1
Specify line coding for 100D module:
LinesTrunks LS/GS/DS1
Specify line compensation between 100D module and
channel service unit (CSU) or far end:
LinesTrunks LS/GS/DS1
Specify type of CSU equipment provided by CO:
LinesTrunks LS/GS/DS1
Specify the type of switch (Release 4.2 and later systems):
LinesTrunks PRI
Assign telephone numbers to PRI lines:
LinesTrunks PRI
Assign B-channels to group:
LinesTrunks PRI
Assign PRI lines to B-channel groups:
LinesTrunks PRI
Specify type of network service for each B-channel group:
LinesTrunks PRI
Specify whether telephone number to send to network for
outgoing calls should be copied from line telephone number:
LinesTrunks PRI
Specify telephone number to send to network for outgoing
calls on PRI lines:
LinesTrunks PRI
3 0
3 0
ClockSync
Type
FrameFormat
Suppression
Line Comp
Channel Unit
SwitchType
Telephone Number
B-ChannlGrp B-channels
B-ChannlGrp Lines
B-ChannlGrp NetworkServ
B-ChannlGrp Copy Number
NumbrToSend
Issue 1
June 1997
Page 441