Disallowed List #7 Default Entries - Lucent Technologies MERLIN LEGEND Release 6.0 System Planning Manual

MERLIN LEGEND Communications System Release 6.0
System Planning 555-660-112
4 Features
System Features
Use a "wild card" character to indicate that you want calls to an exchange
restricted in every area code. During system programming, a Pause (entered
using the Hold button) indicates a wild card character; therefore, use the letter "p"
to indicate on the form that a wild card character should be programmed.
You can design up to 8 lists with a maximum of 10 numbers. Each number can
have up to 11 digits, for example, a leading 1 (if a toll-call prefix is required for
dialing) followed by the area code and telephone number. Star codes (such as
*67) may also be included in the list to block users from accessing special
services offered by the Central Office. Once you have designed the lists, decide
which telephones to restrict. You can assign up to eight lists for each telephone.
Disallowed List #7 is the system default list and includes the numbers most
frequently associated with fraud. The table below lists the default entries for
Disallowed List #7.
Table 4-2.
NOTES:
1. Users cannot dial a number on an Allowed List if it matches a number on
a Disallowed List assigned to the telephone.
2. For a network environment, contact the Network Engineering Group for
any Disallowed Lists needed to restrict calls across the network.

Disallowed List #7 Default Entries

0
10
11
1809
1700
1900
976
1ppp976
Issue 1
February 1998
Page 4-49