Display Icmp Statistics - 3Com 8807 Command Reference Manual

display icmp statistics

Example
# Display the total number of FIB entries.
<SW8800> display fib statistics
Route Entry Count : 30
Syntax
display icmp statistics
View
Any view
Parameter
None
Description
Use the display icmp statistics command to view the statistics information about
ICMP packets.
Related command: display ip interface, reset ip statistics.
Example
# View statistics about ICMP packets.
<SW8800> display icmp statistics
Input: bad formats
echo
source quench 0
echo reply
timestamp
mask requests 0
time exceeded 0
Output:echo
source quench 0
echo reply
timestamp
mask requests 0
time exceeded 0
Table 13 Description on the fields of the display icmp statistics command
Field Description
bad formats Number of input packets in bad format
bad checksum Number of input packets with wrong checksum
echo Number of input/output echo request packets
destination Number of input/output packets with unreachable destination
unreachable
source quench Number of input/output source quench packets
redirects Number of input/output redirected packets
echo reply Number of input/output echo reply packets
parameter problem Number of input/output packets with parameter problems
timestamp Number of input/output timestamp packets
information request Number of input information request packets
IP Performance Configuration Commands
0
5
10
0
10
5
0
bad checksum
destination unreachable 0
redirects
parameter problem
information request
mask replies
destination unreachable 0
redirects
parameter problem
information reply
mask replies
109
0
0
0
0
0
0
0
0
0