Creating An Msdp Peer Connection - 3Com S7906E Configuration Manual

To do...
Enter system view
Enable IP multicast routing
Enable MSDP and enter public
instance MSDP view
Enabling MSDP in a VPN instance
To do...
Enter system view
Create a VPN instance and
enter VPN instance view
Configure a route-distinguisher
(RD) for the VPN instance
Enable IP multicast routing
Return to system view
Enable MSDP and enter VPN
instance MSDP view
For details about the ip vpn-instance and route-distinguisher commands, see MPLS L3VPN
Commands in the MPLS Volume.
For details about the multicast routing-table command, see Multicast Routing and Forwarding
Commands in the IP Multicast Volume.

Creating an MSDP Peer Connection

An MSDP peering relationship is identified by an address pair, namely the address of the local MSDP
peer and that of the remote MSDP peer. An MSDP peer connection must be created on both devices
that are a pair of MSDP peers.
Follow these steps to create an MSDP peer connection:
To do...
Enter system view
Enter public instance MSDP
view or VPN instance MSDP
view
Use the command...
system-view
multicast routing-enable
msdp
Use the command...
system-view
ip vpn-instance
vpn-instance-name
route-distinguisher
route-distinguisher
multicast routing-enable
quit
msdp vpn-instance
vpn-instance-name
Use the command...
system-view
msdp [ vpn-instance
vpn-instance-name ]
1-9
Remarks
—
Required
Disabled by default
Required
Disabled by default
Remarks
—
—
Required
No RD is configured by default.
Required
Disabled by default
—
Required
Disabled by default
Remarks
—
—