Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1302

JUNOSe 11.1.x Command Reference Guide N to Z
t1 lineCoding
t1 channel lineCoding { ami | b8zs }
Syntax
no t1 channel lineCoding
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the type of line coding used by a specific T1 channel on a CT3 interface.
Description
The no version restores the default value, b8zs.
NOTE: This command is deprecated and may be removed completely in a future
release. No alternate command exists, because line coding can be specified only on
the bottom layer.
Options
Controller Configuration
Mode
1260
t1 lineCoding
channel One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27
ami Specifies alternate mark inversion
b8zs Specifies bipolar with eight-zero substitution