Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1426

JUNOSe 11.1.x Command Reference Guide N to Z
undebug ip rip
undebug ip rip ripLog
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Turns off the display of information previously enabled with the debug ip rip
Description
command. There is no no version.
Options
Privileged Exec
Mode
1384
undebug ip rip
ripLog RIP log of interest; one of the following options:
events General RIP events, such as removing RIP from an interface or
creating the RIP process
route Events associated with two RIP routers exchanging routes