Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1393

tunnel mpls autoroute announce
[ no ] tunnel mpls [ traffic-eng ] autoroute announce [ ospf | isis ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the LSP tunnel to register its endpoint (the egress router) with the
Description
configured routing protocol so that the protocol can use the tunnel to determine
routes. If you do not specify a routing protocol, the default is both IS-IS and OSPF.
The no version disables endpoint announcements.
Options
Interface Configuration, Tunnel Profile Configuration
Mode
traffic-eng Specifies optional keyword for compatibility with non–E Series
implementations
ospf Endpoint is announced to OSPF
isis Endpoint is announced to IS-IS
Chapter 8: T Commands
tunnel mpls autoroute announce
1351