Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1264

JUNOSe 11.1.x Command Reference Guide N to Z
sscc retryTimer
sscc retryTimer timer
Syntax
no sscc retryTimer [ timer ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the delay period during which the SRC client (formerly SSCC) waits for a
Description
response from an SRC (formerly SDX or SSC) server. When the timer expires, the
client submits the request to the next server and waits again for the timer to expire.
The request is sent to each timer in rotation until there is a response. The no version
restores the default delay period, 90 seconds.
Options
Global Configuration
Mode
1222
sscc retryTimer
timer Time in the range 5–300 seconds