Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1414

JUNOSe 11.1.x Command Reference Guide N to Z
tunnel source
For DVMRP and GRE tunnels in Interface Configuration mode:
Syntax
tunnel source { ipAddress | interfaceType interfaceSpecifier }
no tunnel source
For IPSec tunnels in Interface Configuration mode:
tunnel source { ipAddress | identity fqdn }
no tunnel source
For DVMRP and GRE tunnels in IP PIM Data MDT Configuration mode and in IP
Tunnel Destination Profile Configuration mode:
[ no ] tunnel source ipAddress
Command introduced before JUNOSe Release 7.1.0.
Release Information
IP PIM Data MDT Profile Configuration mode, and IP Tunnel Destination Profile
Configuration mode added in JUNOSe Release 8.2.0.
In Interface Configuration mode, configures the source for a DVMRP, GRE, or IPSec
Description
tunnel. The no version deletes the tunnel source.
In IP Tunnel Destination Profile Configuration mode, configures the source in the
destination profile for dynamic IP tunnels. The no version deletes the tunnel source.
In IP PIM Data MDT Configuration mode, configures the source in the IP PIM Data
MT profile for multicast VPNs. The no version deletes the tunnel source.
Options
Interface Configuration, IP PIM Data MDT Configuration, IP Tunnel Destination Profile
Mode
Configuration
1372
tunnel source
ipAddress IP address of an existing interface that will serve as the tunnel's
source
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
fqdn Fully qualified domain name of the interface to serve as the tunnel's source;
a maximum of 80 characters