Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1262

JUNOSe 11.1.x Command Reference Guide N to Z
sscc protocol lac
[ no ] sscc protocol lac
Syntax
Command introduced in JUNOSe Release 11.0.0.
Release Information
Configures the SRC client to support policy and QoS configuration on L2TP interfaces
Description
on a virtual router that functions as an L2TP access concentrator (LAC) on one side
of an L2TP tunnel. The no version disables SRC client support for L2TP LAC interfaces.
NOTE: You must enable the SRC client by using the sscc enable cops-pr command
on the virtual router to be able to configure policy and QoS support for L2TP LAC
interfaces by the COPS messages.
Global Configuration
Mode
1220
sscc protocol lac