Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1441

vbr-rt
vbr-rt pcr scr mbs
Syntax
no vbr-rt
Command introduced in JUNOSe Release 7.1.0.
Release Information
ATM VC Class Configuration mode added in JUNOSe Release 7.3.0.
In ATM VC Configuration mode, configures the variable bit rate, real time (VBR-RT)
Description
service category on an ATM PVC. You must specify the peak cell rate (PCR), sustained
cell rate (SCR), and maximum burst size (MBS). The vbr-rt command is valid only
for data PVCs; you cannot use this command for control (ILMI or signaling) PVCs.
The no version restores the default service category, unspecified bit rate (UBR) without
a PCR.
In ATM VC Class Configuration mode, configures the VBR-RT service category as part
of a VC class definition that you assign to an ATM PVC. The no version restores the
default service category, UBR without a PCR, in the VC class.
Options
ATM VC Configuration, ATM VC Class Configuration
Mode
pcr Peak cell rate, in Kbps, in the range 0–149760 (for OC3 ATM modules) or
0–599040 (for OC12 ATM modules)
scr Sustained cell rate, in Kbps, in the range 0–149760 (for OC3 ATM modules)
or 0–599040 (for OC12 ATM modules)
mbs Maximum burst size, in cells, in the range 0–16777215
Chapter 9: U, V, W, and Y Commands
vbr-rt
1399