Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1276

JUNOSe 11.1.x Command Reference Guide N to Z
subscriber-policy
[ no ] subscriber-policy subscriberPolicyName
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates a nondefault subscriber policy for a subscriber (client) interface that belongs
Description
to a bridge group or to a VPLS instance, and accesses Subscriber Policy Configuration
mode from which you define the policy. A subscriber policy is a set of forwarding
and filtering rules that specifies how the subscriber interface handles various packet
types. The no version removes the nondefault subscriber policy from the router.
You cannot change the default subscriber policy values for trunk (server) interfaces
that belong to a bridge group or to a VPLS instance. You also cannot change the
default subscriber policy values for a VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all the MPLS tunnels from
the router to the remote VPLS edge (VE) devices.
Options
Global Configuration
Mode
1234
subscriber-policy
subscriberPolicyName Name of the subscriber policy; alphanumeric string of
up to 32 characters