Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1369

traffic-class-group
[ no ] traffic-class-group trafficClassGroupName
Syntax
[ slot slotNumber | auto-strict-priority | extended ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures a traffic-class group. The no version deletes the selected traffic-class group.
Description
You must remove all local (slot-based) instances of a traffic-class group before you
can remove the global group.
Options
Global Configuration
Mode
Related Topics
trafficClassGroupName Name of the traffic class group; up to 31 characters
slotNumber Number of the slot associated with the group, in the range 0 17
auto-strict-priority Specifies strict-priority scheduling for the group, regardless
of whether the scheduler profile associated with the group node specifies
strict-priority scheduling. Only one auto-strict-priority group can exist; this is the
default behavior for a group.
extended Specifies that strict-priority scheduling for the group is determined
by the scheduler profile associated with the group node; scheduling is either
hierarchical round-robin or strict priority, but if a strict-priority traffic-class group
already exists, this group must scheduled via HRR
Configuring Traffic Classes That Define Service Levels
Configuring Traffic-Class Groups That Define Service Levels
Configuring QoS for an L2TP Session
Chapter 8: T Commands
1327
traffic-class-group