switch-profile
switch-profile profileName
Syntax
no switch-profile
Command introduced in JUNOSe Release 7.2.0.
Release Information
From Domain Map Tunnel Configuration mode, applies the specified L2TP tunnel
Description
switch profile to sessions associated with an AAA domain map. From Tunnel Group
Tunnel Configuration mode, applies the specified L2TP tunnel switch profile to
sessions associated with an AAA tunnel group. An L2TP tunnel switch profile defines
the L2TP tunnel switching behavior for the interfaces to which this profile is assigned.
The no version removes the tunnel switch profile assignment from the AAA domain
map or AAA tunnel group.
Options
Domain Map Tunnel Configuration, Tunnel Group Tunnel Configuration
Mode
profileName Name of the tunnel switch profile; a string of up to 64 alphanumeric
characters
Chapter 7: S Commands
1247
switch-profile