Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1274

JUNOSe 11.1.x Command Reference Guide N to Z
subscriber disconnect
[ no ] subscriber disconnect
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the E Series router to receive RADIUS-initiated disconnect messages from
Description
the RADIUS server. The no version restores the default, in which support for
RADIUS-initiated disconnect messages is disabled on the router.
NOTE: This command and the RADIUS dynamic-request server feature replace the
radius disconnect client command, which has been deprecated and may be removed
completely in a future release. The RADIUS Disconnect Configuration mode has also
been deprecated.
RADIUS Configuration
Mode
1232
subscriber disconnect