Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1411

tunnel session-key-inbound
tunnel session-key-inbound inSaAlgorithms { encryptKey authKey | authKey }
Syntax
no tunnel session-key-inbound
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the encryption and authentication algorithm set and session keys for manual
Description
inbound SAs. The no version removes the keys.
Options
Interface Configuration
Mode
inSAalgorithms Algorithms to use for manual inbound SAs; use the online Help
to see a list of available algorithms
encryptKey Encryption key; string of hexadecimal characters; length varies
according to algorithm
DES 16 hexadecimal characters for the 8-byte key
3DES 48 hexadecimal characters for the 24-byte key
MD5 32 hexadecimal characters for the 16-byte key
SHA 40 hexadecimal characters for the 20-byte key
authKey Authentication key; string of up to 48 characters
Chapter 8: T Commands
tunnel session-key-inbound
1369