Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1388

JUNOSe 11.1.x Command Reference Guide N to Z
tunnel lifetime
tunnel lifetime { kilobytes kbytes | seconds secs | seconds secs kilobytes kbytes }
Syntax
no tunnel lifetime { seconds | kilobytes }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the lifetime of IPSec SAs running on this tunnel. You can specify the lifetime in
Description
seconds and/or volume of traffic. Before either limit is reached, the SA is renegotiated,
ensuring that the tunnel does not go down before the renegotiation is finished. The
no version sets the lifetime to the default lifetime of 28800 seconds and an unlimited
volume.
Options
Interface Configuration
Mode
1346
tunnel lifetime
secs Number of seconds security SAs on this tunnel live before expiring, in the
range 1800–864000
kbytes Volume of traffic in kilobytes that can pass between the tunnel endpoints
using a given SA before the SA expires, in the range 102400–4294967295