Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1307

t1 snmp trap link-status
[ no ] t1 channel [ /subchannel ] snmp trap link-status
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables processing of SNMP link status information about a T1 or fractional T1
Description
channel on a CT3 interface. The no version disables the processing of SNMP link
status information.
Options
Controller Configuration
Mode
channel One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27
subchannel Specifies the FT1 subchannel on a T1 interface, in the range 1–24
Chapter 8: T Commands
t1 snmp trap link-status
1265