Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1075

stateRestriction Information is displayed only for interfaces in one of the
following specified states:
open Interface is administratively enabled, meaning that the no ppp
shutdown command is operational
closed Interface is administratively disabled, meaning that the ppp
shutdown command is operational
up Interface on which the LCP has been negotiated
down Interface on which the LCP has not been negotiated, the negotiations
have failed, or the connection has been ended
lower-layer-down Interface that is not up and is waiting for the lower layer
to come up to initiate negotiations for LCP
not-present Interface that is not present because the hardware is not
available. When the interface is in this state, no detailed information is
available.
passive Interface with the operational status passive
tunneled Tunneled PPP interfaces
no-ip Interface on which IPCP is not configured
ip-open Interface on which IPCP is administratively enabled, meaning that
the no ppp shutdown ip command is operational
ip-closed Interface on which IPCP is administratively disabled, meaning
that the ppp shutdown ip command is operational
ip-up Interface on which the IPCP has been negotiated
ip-down Interface on which the IPCP has not been negotiated, the
negotiations failed, or the connection has been ended
no-ipv6 Interface on which IPv6CP is not configured
ipv6-open Interface on which IPv6CP is administratively enabled, meaning
that the no ppp shutdown ipv6 command is operational
ipv6-closed Interface on which IPv6CP is administratively disabled, meaning
that the ppp shutdown ipv6 command is operational
ipv6-up Interface on which the IPv6CP has been negotiated
ipv6-down Interface on which the IPv6CP has not been negotiated, the
negotiations failed, or the connection has been ended
no-osi Interface on which OSINLCP is not configured
osi-open Interface on which OSINLCP is administratively enabled, meaning
that the no ppp shutdown osi command is operational
osi-closed Interface on which OSINLCP is administratively disabled, meaning
that the ppp shutdown osi command is operational
Chapter 7: S Commands
1033
show ppp interface