Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1452

JUNOSe 11.1.x Command Reference Guide N to Z
vlan bulk-config shutdown
To shut down or reenable the specified bulk configuration or a specific VLAN range:
Syntax
[ no ] vlan bulk-config bulkConfigName shutdown
[ no ] vlan bulk-config bulkConfigName shutdown vlan-range vlanIdStart vlanIdEnd
To shut down or reenable VLAN ranges containing double-tagged S-VLAN IDs or
based on agent-circuit-identifier information:
[ no ] vlan bulk-config bulkConfigName shutdown svlan-range s-vlanIdStart s-vlanIdEnd
{ vlanIdStart vlanIdEnd | any | agent-circuit-identifier }
Command introduced in JUNOSe Release 7.3.0.
Release Information
Administratively disables (shuts down) the specified bulk configuration, or a specified
Description
VLAN range or subrange. When you shut down a specified bulk configuration, all
VLAN ranges, including those based on double-tagged S-VLAN IDs or
agent-circuit-identifier information, are disabled. The no version reenables the
specified bulk configuration, the specified VLAN range, or the specified subranges;
this is the default condition.
Options
Interface Configuration
Mode
1410
vlan bulk-config shutdown
bulkConfigName Name of the VLAN range; string of up to 80 characters
vlanIdStart Starting VLAN ID of the VLAN subrange you are configuring
vlanIdEnd Ending VLAN ID of the VLAN subrange you are configuring
s-vlanIdStart Starting S-VLAN ID of the S-VLAN subrange you are configuring
s-vlanIdEnd Ending S-VLAN ID of the S-VLAN subrange you are configuring
any Specifies the VLAN ID as a wildcard
agent-circuit-identifier Specifies a VLAN range that is based on
agent-circuit-identifier information