Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1327

telnet
telnet ipAddress | hostname [ vrf vrfName ] [ ipPortNumber | ipPortType ]
Syntax
[ source-interface interfaceType interfaceSpecifier | noecho | line | debug |
verbose ]*
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables connections to remote routers via the embedded Telnet client. There is no
Description
no version.
Options
ipAddress IP address of the remote router
hostname Name of the remote router
vrfName Name of the VRF to which the command applies; string of 1–32
alphanumeric characters
ipPortNumber Number of the port for the connection to the remote router, in
the range 0–65535; default value is port number 23, the Telnet port. For more
information about port numbers and associated processes, see www.iana.org.
ipPortType Name of a well-known port, as follows:
bgp Border Gateway Protocol (port 179)
chargen Character generator (port 19)
cmd Remote commands (port 514)
daytime Daytime (port 13)
discard Discard (port 9)
domain Domain Name Service (port 53)
echo Echo (port 7)
exec Exec (port 512)
finger Finger (port 79)
ftp File Transfer Protocol (port 21)
ftp-data FTP data connections (port 20)
gopher Gopher (port 70)
hostname NIC hostname server (port 101)
ident Ident Protocol (port 113)
irc Internet Relay Chat (port 194)
klogin Kerberos login (port 543)
Chapter 8: T Commands
1285
telnet