Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1301

t1 framing
t1 channel framing { esf | sf }
Syntax
no t1 channel framing
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the type of framing used by a specific T1 channel on a CT3 interface. The
Description
no version restores the default value, esf.
Options
Controller Configuration
Mode
channel One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27
esf Specifies extended superframe
sf Specifies superframe
Chapter 8: T Commands
1259
t1 framing